Foam cannons are a lot of fun to use when washing your automobile & they also get the job done well. Plenty of search about FAQs has been found by various clients. For example, it is possible to create a thick, workable foam on your car with a power washer and shave cream. If you are like most folks, bigger foam connotes more powerful cleaning.
Foam cannons & the best ways to use them are the focus of this tutorial.
Is using snow foam worth it?
The advantages of snow foam over competing products are numerous. It is common for thick foaming car shampoos to have a pH level that is close to neutral. Using a dense, pH-neutral vehicle soap protects any wax, acrylic sealant, or ceramic covering that has been put to the surface while also providing excellent cleaning power.
Dishwashing soap, for example, might speed up the deterioration of your paint coats.
The dense foam also has a lubricating effect, which helps keep your clear coat free of tiny swirls and scratches. Let the thick snow foam lay on your vehicle's paintwork for a few minutes to break down the dirt & road-grime adhesion.
Why isn't the soap being pulled by the foam cannon?
The following are the two most common reasons why foam cannon does not extract soap from the bottle:
1. Inadequate soap dilution: In the foam cannon container with the soap, very little water was supplied.
2. Foam cannon flask pickup location: The pickup hose inside some foam cannon bottles can suck to the bottom or sideways of the flask, preventing flow.
For how long should snow foam be left on a vehicle?
If possible, keep the snow foam on your finish for around 10 minutes. Your paintwork will benefit from the time it takes snow foam to disintegrate the connections between dirt & grit and your surface.
The touchless approach of washing your car can only do so much. If your car is filthy, you will need to wash it by hand after applying the snow foam or you can apply another layer and let it sit for another 10 minutes.
Is it possible to utilize snow foam without using a pressure cleaner?
There is no need for a pressure cleaner to utilize snow foam but it is the best way to get the thickest layer of foam.
You can use a garden hose-connected foam gun to simulate snow foam creation if you do not want to utilize a pressure cleaner. An alternative to foam cannon would be to use a foam gun, which is less powerful and does not create as much and as high a grade of dense protective suds.
Hand washing without a foam cannon or foam gun, you may also apply auto detergent directly to your wash mitt or wash pail. To enhance the lubricating and cleaning power of your wash mitt, apply shampoo directly to the mitt to ensure that you have enough soap between your glove & clear coat. It will also save soap and make the vehicle uniform.
Do you wash your hands after using foam cannon?
If you are using the touchless approach and your vehicle is not filthy, this step is not necessary. Hand washing a dirty car after using foam cannon to coat it in a thick coating of suds is the best way to clean it.
